New Mustang Parts from Scott Drake Oct 10
Classic Aluminum Rims
Scott Drake is proud to offer these licensed reproductions* of this classic
1960’s wheel design, at an affordable price. Built with today’s modern technology, these wheels are available in Chrome, Polished or Anthracite and all come with Chrome Logoed Cap. Available in sizes from 15x6 to 17x8.
Lug nuts sold separately under part # S1MS-1007-LUGKT which includes 16 Chrome lug nuts, 4 locking Chrome lug Nuts, Key Lock and 4 Chrome Valve Stems.
1965-66 Mustang Turn Signal Switch (Reproduction)
C5OZ-13341-BR
Now made by Scott Drake! This 1965-66 Mustang turn signal switch is now available at a new lower price than before, but with the same OEM quality and look as our original Ford switches.
1966-68 Mustang Transmission Kick Down Cable Kit
C6OZ-7A187-KIT
A 9-piece kit, our Transmission Kick Down Cable Kit includes our cable, lever, spring & bracket, along with all the hardware for simple installation.
Mustang Turn Signal Light Lever 
(Short)
Same quality as our standard length Turn Signal Light Levers, but in a 5 1/2" length. Perfect for smaller diameter steering wheels.
1971-73 Mustang Seat Hinge 
Covers (Black)
These covers are often broken or missing. Molded in sturdy Black ABS Plastic. Paint to match. 1 Kit required per seat.
1967 Mustang Seat Side Molding
For years everybody has sold a one size fits all. But Ford changed the bottom hole location by approx ¼” in 1967 which has required drilling a new hole in your Seat Frame to make the 65-66 Seat Side Shield work. Thankfully that is no longer necessary. Highly Polished Stamped Aluminum.
Classic Mustang Exhaust
We now offer the most comprehensive line of exhaust products for 1964 -1973 Mustangs and 1965-70 Shelbys. These Exhaust products are of premium quality and made to original factory specifications in the USA. All of our products have been test fitted on the appropriate Mustang prior to production to insure a trouble free installation. We use only the heaviest gauge aluminized tubing available.
Mufflers have correct factory brackets when needed and are also aluminized to eliminate early rust out. All Kits are compression bent just like originals for that Concourse look. H-Pipes and Hanger kits are sold separately.
Classic Mustang Bezel Tools
Made from solid billet aluminum with an anodized finish, these dedicated tools are designed for easy removal and installation of Mustang bezels without causing damage or scratches.
1964-69 Hood Hinge Spring, Concourse
These are made in the USA with the exact same spring rate as the originals. Not for use with fiberglass hoods. Also fits 1970, but not concours for that year.
1964-66 HEATER SWITCH ASSEMBLIES
Available in a 2-speed version for 1964 - early 1965 (before 4/1/65), and a 3-speed version for late 1965 - 1966.
(64-65 before 4/1/65, 2-speed)
(65-66 after 4/1/65, 3-speed)
PUSH BUTTON SEAT BELTS
New from Scott Drake, original looking seat
belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960’s. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!
1967-68 Mustang Basic Repaint Kit
This kit features many of the basics parts that are replaced during a basic repaint. Includes hood bumpers, door bumpers, trunk bumpers, tail lamp and lens gaskets, door handle pads, backup lamp pads, parking lamp pads, cowl to hood seal, round antenna pad, trunk housing pad, quarter cap and fender ext seals.
71-72 Mustang Fender to Bumper Fillers
For 71-72 Mustangs with chrome front bumper. This is molded soft plastic that fills the gap between the bumper and fender. Exact reproduction and exact colors as the originals. Includes attaching screws.
1965-69 MUSTANG TILT STEERING COLUMNS
ididit introduces the first Ford Top Shaft and Ford Turn Signal Switch tilt steering column for the 1965-66 Mustangs! This made to fit column will include a special new floor mount, 8-position tilt, Mustang style knobs & handles and male & female plugs with terminals. ididit’s new Mustang column will accept a stock Mustang steering wheel or an aftermarket wheel with an adaptor. By using the stock underdash mount and a coupler (sold separately), the installation is a breeze! The new 8-position tilt 1965-66 Mustang column is available in Paintable Steel, Chrome and Black Powder Coated. Lower shaft is 3/4” 36. Don’t forget your installation kit, each installation kit from ididit is specific to your Mustang application. Each ididit column is 100% American Made. Note: 65-67E require cutting original shaft.
