1967-68 Mustang GT/CS Lower Quarter Non-Functional Side Scoops
Available from Drake are these 1967-68 Mustang Lower Quarter Non-Functional Side Scoops. These are reproductions of the ones used on 1968 California Specials.
1967-68 Mustang Lower Quarter Functional Side Scoops
Available from Drake are these 1967-68 Mustang Lower Quarter Functional Side Scoops. These are reproductions of early 1967 Shelby’s that were functional for brake cooling.
1969-70 Mustang Fastback 1/4 Window Anchor Bolt
The 1969-70 Mustang Fastback 1/4 Window Anchor Bolt is a special stainless steel capped bolt that is seen from the outside of the car and goes through the quarter window glass where the handle is attached.
1964-73 Mustang Exhaust Studs with Nuts
These 7/16”x14 studs are 2.25” long and will work on all 6 cylinders and V8 exhaust manifolds except RH Big Block with spacer.
1967-68 Mustang 200km Speedometer Overlay – 120mph
This 1967-68 Mustang 200km Speedometer Overlay fits 1967 AND 1968 Cars with 120mph round speedometers to convert to kilometers.
1967-68 Early Mustang 390 GT High Performance Air Cleaner With CA EM tube
New by Scott drake is the extremely rare 1967-68 Early Mustang 390 GT High Performance Air Cleaner with the emissions control tube.
1967 Mustang 390 GT High Performance Air Cleaner Without EM tube
New by Scott drake is the extremely rare 1967 Mustang 390 GT High Performance Air Cleaner without the emissions control tube.
1966 Mustang 200km Speedometer Overlay – 120mph
This 1966 Mustang 200km Speedometer Overlay fits 1966 Cars with 120mph round speedometers to convert to kilometers.
1965-66 Mustang 230km Speedometer Overlay – 140mph
This 1965-66 Mustang 230km Speedometer Overlay fits 1965 GT and Pony Interior Cars and all 1966 Cars with 140mph round speedometers to convert to kilometers.
1964-68 Mustang 6 Cylinder Carburetor Spacer
Made by Scott Drake from high quality die-cast aluminum. This 1964-68 Mustang 6 Cylinder Carburetor Spacer is an exact reproduction of the original.
1969-70 Mustang Concours Front Park Brake Cable OE
Scott Drake used the original Factory Prints to achieve the best fit for the 1969-70 Mustang Concours Front Park Brake Cable.
Keep your Classic Mustang dash and interior safe from the sun with Scott Drakes new fade resistant Sun Shade for the 1964-73 Mustang.
1967-68 Mustang Deluxe Chrome Dash Trim Set
Available from Scott Drake, this mirror like Chrome Deluxe Interior Dash Trim set is an exact copy of the originals. Fits 1967-68 Mustang Deluxe Interior cars without factory A/C.
1970-73 Mustang 351c Thermostat Housing
New by Drake an nice reproduction of the 1970-73 Mustang 351C Thermostat Housing. Made from Cast Aluminum construction and will not rust. Paint it Ford Engine Blue to match original or leave natural, or polish, to compliment Aluminum Intake Manifolds.
1965-70 Mustang Fastback Rear Seat Foam Cushion
1965-70 Mustang Fastback Rear Seat Foam Cushion is now available from Scott Drake. Seat Cushions are a common replacement for Mustangs as they endure a lot of use. The Back Rest and Center Hump Section are die-cut from 1” foam and not molded as original.
1969-73 Mustang Instrument Voltage Regulator
Available from Drake, a 1969-73 Mustang Instrument Voltage Regulator featuring an improved design to be more reliable and accurate in varying environments like heat and humidity. Features solid state electronic circuitry.
1964-73 Mustang Convertible Front Tack Strip
New Front Tack Strips are a must when installing a new Convertible Top on your 1964-73 Mustangs and Scott Drake now has them available. Fits both Front Header and #4 Bow but will not work for the rear Tack Strip. Two required per car.
1966 Mustang Economy Glove Box Door w/o Emblem
Available from Scott Drake is the 1966 Mustang Economy Glove Box Door without the Emblem. Excellent reproduction part, pressure die cast zinc with show car chrome and correct black paint. Please note this does not include correct Horse Emblem.
1965 Mustang GT Economy Glove Box Door w/o Emblem
Available from Scott Drake is the 1965 Mustang GT Economy Glove Box Door without the Emblem. Excellent reproduction part, pressure die cast zinc with show car chrome and correct black paint. Please note this does not include correct Horse emblem.
1965-66 Mustang Pony Interior Glove Box Door w/o Emblem
Available from Scott Drake is the 1965-66 Mustang Pony Interior Glove Box Door w/o Emblem. Excellent reproduction part, pressure die cast zinc with walnut woodgrain insert. Please note this does not include correct Horse Emblem.
1965-1966 Shelby Bolt On Hood Scoop
Available from Scott Drake is the 1965-66 Shelby Bolt On Hood Scoop. This molded fiberglass Hood Scoop was reproduced to duplicate the GT350 Hood. This version is bolted onto the hood, saving several hours of labor campared to the bond on version
1969 Mustang Under Dash Wiring Harness w/Tach
A complete 1969 Mustang Under Dash Wiring Harness with Factory In-Dash Tach is now available from Scott Drake. Includes Fuel Block Assembly.
1964-65 Mustang Economy Glove Box Door w/o Emblem
Available from Scott Drake is the 1964-65 Mustang Economy Glove Box Door without the Emblem. Excellent reproduction part, pressure die cast zinc with show car chrome and correct black paint. Please note this does not include correct Horse emblem.